It is used for automatic welding of stator plate pack of electric motors on 4 sides.
Operation sequence:
- manual placing of the plate pack, start of the machine
- clamping of the plate pack with 40 kN clamping force
- height measurement
- if it is correct: 3 welds in the first corner
- turning in 90° – next 3 welds, next corners
- turning out of the welding space, removal of the welded plate pack
Store empty trolleys for moving materials and parts
The trolley feeder is part of the plant's logistics system. It provides forklift trucks with mobile containers for the workplace.
It is suitable for the storage of standard pallets and pallet cages.
Our company also manufactures material handling trolleys.
Heat treating furnace for windscreens transformed according to the quality prescriptions of Audi. The automatic locking mechanism releases only after a pre-set time.
Induction hot forming equipment under research and development, capable of creating the optimum shape for the plastic forming of forged tool pre-products.
The gripping head mounted on robotic arm is used to grip aluminium rods. It is pneumatically operated.
Techical data:
- Maximum clamping force is 10 kN per gripping jaw.
It is used for geometrical checking of welded motor lamination.
Measurements:
- height measurement
- perpendicularity measurement of the side arch
- bottom and top flatness measurement
- superscription of the correct pieces, automatic sorting out of the faulty ones
It lifts and manipulates the countinous casting tools without recourse to the hall crane.
Technical data:
- fast mode: 10 m/min
- positioning speed: 40mm/s
The basic material is dollop of plasticine consistency containing ground glass fiber between two foil layers.
During the preparation first the foil layers have to be removed from the basic material, then strips of proper length according to the manufacturing instructions have to be cut from it. From technological point of view the parameter to be set is not the strip length but the strip mass. The proper strip mass can be ensured by accurate cutting.
The bench tests fuse switch disconnectors by touching 3x3 measuring points to the fuse switch disconnector to be checked. Thus eventual faults can be detected.
The faultless fuse switch disconnectors will be marked by a small bored hole, the faulty ones leave the bench without being bored.
The purpose of the device is to apply a tensile load to the strand, insulator test specimen of the magnitude specified in the test procedures, and to hold or increase the given load until the specimen ruptures. During the test, the force and elongation values are continuously measured, recorded and documented.
Technical data:
- Limit of measurement 150 or 300 kN
- Force measurement accuracy: ≤ 0,2 %
- Elongation measurement accuracy: ≤ 1 mm
- Workpiece length: 2-14 m
- Clamping length: 1000 mm
- Enclosure dimensions: 970x1100x22220 mm
- Weight: 4780 kg
The equipment is suitable to disassemble railway wheel sets. After placing the wheel set onto a service carriage the press removes first one wheel, then, after turning the axle in 180°, the other one. The regime is semi-automatic.
High-strength pipes are applied for pressing axles and wheels of different dimensions.
Technical data:
- Pressing-off force: 400 kN
The equipment is used to automatically press railway wheel sets on axles according to the corresponding prescriptions. It records the prescribed distance-time diagram and the wheel distance.
Functions:
- pressing-on: after positioning the axle and the wheels automatic diameter measuring, pressing-on of the wheels, wheel distance setting, recording
- pressing-off: in order to check the conformity of the pressing-on
Pressing-on force: 2000 kN
Pressing-off force: 1000 kN
This pneumatically operated equipment is used for precisely machining the top casing of Velux windows.
Technical data:
- simultaneous movement of 4 drilling and milling spindle
- machining of penetrations by sequence control
Bench for checking the shearing and bending strength of glued joints of window sashes.
Technical data:
- breaking force: 100 kN
- stroke: 120 mm
- approaching speed: 12,5 mm/s
- checking speed: 2,5 mm/s
Automated equipment to size Velux skylight window casing parts, to assemble and to nail them in short standard piece time with strict observance of the Velux technology